Reconditioned Instrument

Used Waters 2777 Sample Manager

Waters 2777

Reference: st3893


Part No.: 2777 Manufacturer: Waters Qty available: 4 Warranty: 6 month On-Site Warranty (UK)

This 2777 Sample Manager is a high-capacity, fast robotic system for the preparation and injection of samples. Designed for high-throughput HPLC and LC/MS, the 2777 is configured with a single injector for routine applications; you can also configure it with a four-injector module for higher-throughput multiplexed injections.

See this unit working below:


  • XYZ robot with syringe (no tubing) in the sample path minimizes sample loss from adsorption which facilitates higher detection sensitivity
  • Software and hardware architecture designed to support open access/ walk-up technology
  • Options and accessories for analytical-scale HPLC and HPLC/MS work


  • Sample Capacity: 98 x 2 mL vials per tray, 200 x 1 mL vials per tray, 32 x 10 mL / 20 mL vials per tray, 6 deepwell or standard microplates 12 standard microplates
  • Wash Station: 2 different wash solvents
  • Carryover: < 0.05%
  • Injection Speed: 20 - 250µL/sec. or (0.5-5 seconds to dispense 100µL)
  • Injection Cycle Time Minimum: < 20 sec (injection to injection, includes needle wash)
  • Injection Modules : One or four, six part valves, each equipped with a 20 µL loop (standard), optional loop sizes up to 5000 µL
  • Dilutor syringe sizes: 1 mL, 2.5 mL (standard), 5 mL, 10 mL
  • Injection Volume Range: 10 to 1µL with optional larger loop and syringe
  • Replicate injections: 1-99 from one vial

Also available: extra vial trays and wash station module.
Comes fully serviced and tested at our workshops here in Kent, we offer a variety of warranty options, both on-site and return to base, so please contact us for pricing details.

Warranty Terms & Conditions For Used Equipment

Note: Our warranty terms quoted for this instrument apply to mainland UK customers. For clients outside of this locale, please enquire at point of sale.

Jaytee Biosciences Ltd warranty all reconditioned instruments for a pre-agreed period. This period can be from 30 days to 1 year from the date of installation / delivery of the instrument. Generally newer equipment has a longer warranty than older equipment.

Additional warranty periods can be negotiated at the time of purchase if required.

The list below outlines the items covered by our warranty:

Parts Included In Warranty

  • Electronic Assemblies – e.g. PCB’s, Transducers, Interface Cards
  • Mechanical Assemblies – e.g. Pump Drive assemblies, XYZ Transport Systems
  • Power Supplies – e.g Low and High Voltage Supplies, Lamp Supplies, Cases, Metalwork and Enclosures.
  • Major assemblies – PCB’s, Power Supplies, and Displays etc covered for warranty term.

Typical Parts NOT Included In Warranty (autosamplers)

  • Needle
  • Needle Seat
  • Needle Seat Holder
  • Rotor Seal
  • Stator Face
  • Isolation Seal
  • Plunger
  • Plunger Seals
  • Syringes
  • Wetted Path Components
  • Software Updates
  • Tubing and Fittings
  • Capillaries
  • Consumable Parts
  • Tools


Call us, quoting "st3893 Waters 2777 Sample Manager" on
+44 (0)1227 265333, or alternatively contact us by email.